- International Journal Of Structural And Civil Engineering Research Impact Factor
- School Of Architecture, Civil And Environmental Engineering ‐ Epfl
- The Arup Journal 2022 Issue 1
- M.tech Structural Engineering Projects
International Journal Of Structural And Civil Engineering Research Impact Factor – The International Journal of Civil Engineering and Technology (IJCIET) is a peer-reviewed, open-access journal that publishes original research articles and review articles in all fields of civil engineering. The Journal is a peer-reviewed journal, which aims to provide a complete and reliable source of information on the latest developments in civil engineering. The journal provides a forum for the international civil engineering community to present and discuss matters of key interest including new developments in civil engineering.
The journal publishes original papers on theoretical and practical aspects of civil engineering and related sub-topics. The International Journal of Civil Engineering and Technology (IJCIET), published monthly in English-language, provides an international forum for scholars to disseminate their research findings and developments in the field of civil engineering.
International Journal Of Structural And Civil Engineering Research Impact Factor
Dr. H.T. Basavarajappa – Professor of Earth Science, Department of Studies in Earth Science, University of Mysore, India
Curved And Layered Structures
Dr. Yong Wei Shan – Associate Professor, Construction Engineering and Project Management, Oklahoma State University, USA
Dr Manoj Khandelwal – Senior Lecturer, Mining Engineering, School of Engineering, Information Technology and Physical Sciences, Federation University Australia, Ballarat, Australia
Dr. Rahul Verma – Associate Professor, Department of Mining and Geological Engineering, Botswana International University of Science and Technology, Botswana
Dr. Taha Awadullah El Sayed Ibrahim – Professor, Department of Civil Engineering, Faculty of Engineering – Branch, Benya University, Egypt
Light Transmitting Concrete: A Review By Research Publish Journals
Dr. Ayaz M. Fazil Al-Quraishi – Professor of Applied Remote Sensing and GIS, Department of Petroleum and Mining Engineering, Faculty of Engineering, Tushak International University (TIU), IRAQ
Dr. Sapountzakis J. Evangelos – Professor of Structural Analysis, Institute of Structural Analysis and Antiseismic Research, School of Civil Engineering, National Technical University of Athens, GREECE
Dr. Seyed Hamida – Professor, Institute of Basic and Applied Science, Egypt-Japan University of Science and Technology, Alexandria, Egypt
Dr. Ashraf Mansour Habib Mansour – Professor, Civil and Architectural Department, Engineering Division, National Research Center, Cairo, Egypt
International Journal Of Advance Engineering And Research Development (ijaerd)
Dr. Raja Rizwan Hussain – Associate Professor, Department of Civil Engineering, College of Engineering, King Saud University, Riyadh, Saudi Arabia
Dr. Anant Pragi – Assistant Professor, Department of Civil Engineering, Sardar Vallabhbhai National Institute of Technology, Surat, India
Dr. Bandta Pekari – Assistant Professor, School of Civil Engineering, Campus-3, KIIT- Deemed to be University, Bhubaneswar, India
Dr. J. Babu Rao – Associate Professor, Department of Civil Engineering, Narasaropet Engineering College, Narasaropet, Andhra Pradesh, India
School Of Architecture, Civil And Environmental Engineering ‐ Epfl
Manuscripts must be submitted by one of the manuscript authors through the online manual submission system. Proposals submitted by anyone other than one of the authors will not be accepted.
Without the use of a word processing tool, only electronic PDF or MS-Word files can be submitted through the online submission system. If the online submission is not successful due to technical reasons, the author can submit the manuscript to Editor@
The abstract should summarize the content of the paper. Try to keep the summary under 350 words. Do not cite or show equations in abstracts. The journal will be printed from the same size copy you prepared. Your manuscript should be printed on A4 paper (21.0 cm x 29.7 cm). It is important to follow the margin and style described below carefully. This enables us to maintain consistency in the final printed copies of the journal. Please keep in mind that the manuscript you prepare will be photographed and printed as it is received. Readability of copy is of great importance. (12)
The introduction of the paper should describe the nature of the problem, previous work, objectives, and contributions of the paper. The contents of each section can be provided for easy understanding of the paper. (12)
International Review Of Applied Sciences And Engineering
Headings and subheadings, beginning with “1. Introduction”, appear in upper and lower case letters and should be set in bold and aligned flush to the left. From the introduction to the introduction, all headings are arranged sequentially using headings 1, 2, 3, etc. Subheading numbers are 1.1, 1.2, etc. If a subsection is further divided, number 1.1.1, 1.1.2 etc.
Font size for headings is 12 points with bold face and subsections with 12 points and not bold. Do not underline any headings, or include dashes, colons, etc. (12)
The first paragraph under each heading or subheading should be flush to the left, and subsequent paragraphs should be indented five spaces. A colon is inserted before an equation, but there is no break after the equation. All equations are numbered and referred to in the text only by the number enclosed in a round bracket (ie, (3) reads as “Equation 3”). Make sure that any different numbering system you use in your paper does not confuse a reference  or an equation (3) designation. (12)
Image captions appear below the figure, are offset to the left, and are in lowercase letters. When referring to a figure in the body of the text, the abbreviation “Fig.” is used. Figures should be arranged as they appear in the text.
Csir Structural Engineering Research Centre Govt. Of India
Table captions appear centered above the table in upper and lower case letters. When referring to a table in the text, no abbreviation is used and “table” is capitalized. (12). Figures and tables should be included in the running text
A conclusion section should be included and clearly indicate the advantages, limitations, and possible applications of the paper. Although a conclusion may summarize the main points of the paper, do not copy the summary as a conclusion. A conclusion may elaborate on the significance of the work or suggest applications and improvements. (12)
A reference list must be included using the following information as a guide. Only references to the cited text are included. Each reference is cited in the text by a number enclosed in square brackets (ie, ). References must be numbered and arranged where they are first mentioned in the paper, not alphabetically.
 M Ozaki, Y. Adachi, Y. Iwahori, and N. Ishii, Application of fuzzy theory to writer recognition of Chinese characters, International Journal of Modeling and Simulation, 18(2), 1998, 112-116. (12)
The Arup Journal 2022 Issue 1
 RA. Moore, Interval Analysis (Englewood Cliffs, NJ: Prentice-Hall, 1966). (12) Remember that the title of the book is in small letters and italics. There is no comma after the title. The publisher and the publisher’s place are given.
 P.O. Bishop, Neurophysiology of binocular vision, J. In Hausmann (ed.), Handbook of Physiology, 4 (New York: Springer-Verlag, 1970) 342-366. (12) Note that the place of publication, publisher and year of publication are enclosed in brackets. The editor of the book is listed before the title of the book.
 DS Chan, Theory and Implementation of Multidimensional Discrete Systems for Signal Processing, Doctoral Diss., Massachusetts Institute of Technology, Cambridge, MA, 1978. (12)
 W.J. Book, Modeling Design and Control of Flexible Arms: A Tutorial Review, Proc. 29th IEEE Conf. on Decision and Control, San Francisco, CA, 1990, 500-506 (12)
Architecture, Building And Construction
Journals that do not follow the journal’s guidelines will be returned to authors without scientific evaluation. Manuscripts submitted in accordance with the journal’s guidelines will be reviewed by the Editor-in-Chief or Editor, who will assign them to reviewers. The review process is double-blind. The editor prepares a decision letter based on the reviewers’ feedback, which is sent to the corresponding author. All non-reviewed prescriptions are returned within 10 days and prescription decision letters are sent within 4 weeks.
Open Access authors retain the copyright of their papers, and all open access articles are distributed under the terms of the Creative Commons Attribution License, CC BY (or Creative Commons Attribution-Non Commercial License CC BY-NC), which allows users to ( non-commercially. ) to copy, use, distribute, transmit and publicly display the work and create and distribute derivative works, in any digital medium, for any responsible purpose, subject to proper attribution to the author.
The use of generic descriptive names, trade names, trademarks, etc. in this publication, even if not specifically identified, does not mean that these names are not protected by relevant laws and regulations.
While the advice and information in this journal is believed to be true and correct at the date of its going to press, neither the authors, editors, nor publishers accept legal responsibility for any errors or omissions. THE PUBLISHER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE CONTENT HEREIN.
Indian Institute Of Technology, Indore
The publication is committed to maintaining high standards through rigorous peer-review with strict ethical policies. Any violation of professional ethics, such as plagiarism, fraudulent use of data, false claims of authorship, is taken extremely seriously by editors with zero tolerance.
The publication follows the Code of Conduct of the Committee on Publication Ethics (COPE), and follows the COPE flowcharts for resolving cases of suspected misconduct.
Publications charge an Article Processing Charge (APC) when an article is accepted for publication. These charges cover the costs of turning a manuscript into a finished article, as well as the cost of hosting, distributing and promoting an article.
We are committed to making publishing costs as transparent as possible and thus each journal’s costs are clearly displayed on each journal’s home page.
M.tech Structural Engineering Projects
When a manuscript is submitted, it goes through several different departments of the publication to ensure quality check, peer review, production and promotion of the article in a timely manner.