Journal Of Marine Engineering And Technology Impact Factor
- Conference The 1st International Conference On Maritime Studies And Marine Innovation (msmi 2020)
- Curved And Layered Structures
- Naval Architecture, Ocean & Marine Engineering
- Indian Journal Of Engineering
- The Motivations And Expectations Of Students Pursuing Maritime Education
- Advancements In Civil Engineering & Technology
- Green Processing And Synthesis
- Suranaree Journal Of Science And Technology
Journal Of Marine Engineering And Technology Impact Factor – We can publish articles in SCOPUS, WOS-SCIE-SSCI-ASCI-ESCI, ABDC indexed and UGC CARE listed journals of our third party, collaborative, partner journals. Click here for more information
The International Journal of Civil Engineering and Technology (IJCIET) is a peer-reviewed open access journal that publishes original research articles and review articles in all areas of civil engineering. The Journal is a peer-reviewed journal that aims to provide the most comprehensive and reliable source of information on the latest developments in civil engineering. The journal is a forum for the international civil engineering community to present and discuss important issues, including new developments in civil regulation.
Journal Of Marine Engineering And Technology Impact Factor
The journal publishes original articles on theoretical and practical aspects of civil engineering and related subtopics. The International Journal of Civil Engineering and Technology (IJCIET) is published monthly in English and is an international forum for researchers to disseminate their research findings and developments in the field of civil engineering.
Conference The 1st International Conference On Maritime Studies And Marine Innovation (msmi 2020)
Dr. H.T. Basavarajappa – Professor of Earth Sciences, Department of Earth Sciences, University of Mysore, India
Dr. Yongwei shan – Associate Professor of Civil Engineering and Project Management, Oklahoma State University, United States of America
Dr. Manoj Khandelwal – Senior Lecturer in Mining Engineering, School of Engineering, Information Technology and Physical Sciences, Federation University of Australia, Ballarat, Australia
Dr. RAHUL VERMA – Associate Professor, Department of Mining and Geological Engineering, Botswana International University of Science and Technology, BOTSWANA
Curved And Layered Structures
Dr. Taha Awad Allah El-Sayed Ibrahim – Professor, Department of Civil Engineering, Faculty of Engineering, Shoubra University, Benha
Dr. Ayad M. Fadhil Al-Quraishi – Professor of Applied Remote Sensing and GIS, Department of Petroleum and Mining Engineering, Faculty of Engineering, Tiske International University (TIU)
Dr. Sapountzakis J. Evangelos – Professor of Structural Analysis, Institute of Structural Analysis and Anti-Seismic Research, School of Civil Engineering, National Technical University of Athens, GREECE
Dr. Sayed Hemeda – Professor, Institute of Basic and Applied Sciences, Egypt-Japan University of Science and Technology, Alexandria, Egypt
Open Life Sciences
Dr. Ashraf Mansour Habib Mansour – Professor, Civil and Architectural Division, Engineering Department, National Research Center, Cairo, Egypt
Dr. Raja Rizwan Hussain – Associate Professor, Department of Civil Engineering, College of Engineering, King Saud University, Riyadh, Saudi Arabia
Dr. Anant Parghi – Associate Professor, Department of Civil Engineering, Sardar Vallabhbhai National Institute of Technology, Surat, India
Dr. BANDITA PAIKARAY – Assistant Professor, School of Civil Engineering, Campus-3, KIIT – Deemed University, Bhubaneswar, India
Naval Architecture, Ocean & Marine Engineering
Dr. G. Babu Rao – Associate Professor, Department of Civil Engineering, Narasaraopeta College of Engineering, Narasaraopeta, Andhra Pradesh, India
Manuscripts must be submitted by one of the manuscript authors through the online manuscript submission system. Proposals by persons other than one of the authors will not be accepted.
Regardless of word processor source, only electronic PDF or MS-Word files can be submitted through the online submission system. If online submission is not possible for any technical reason, the author may submit the manuscript to editor@.
The abstract should summarize the content of the paper. Try to keep your abstract under 350 words. Do not make shortcuts or show equations in the abstract. The magazine will be printed from a copy of the same size prepared by you. Your manuscript must be printed on A4 paper (21.0 cm x 29.7 cm). The margins and style described below must be carefully followed. This will allow us to maintain consistency in the final printed copies of the magazine. Please note that your completed manuscript will be photographed and printed upon receipt. Legibility of the copy is extremely important.(12)
Indian Journal Of Engineering
The introduction of the paper should explain the essence of the problem, previous work, purpose and contribution of the work. The content of each chapter can be presented to make the paper easier to understand. (12)
Headings and subheadings beginning with the letter “1. Introduction’ are in uppercase and lowercase and should be bolded and left-aligned. All headings in the Acknowledgments introduction are numbered sequentially using 1, 2, 3, etc. Subheadings are numbered 1.1, 1.2, etc. If a subsection needs to be broken down further, numbers 1.1.1, 1.1.2, etc.
Header font size is 12 point bold and subsections are 12 point, not bold. Do not strike out any headings or add dashes, colons, etc. (12)
The first paragraph under each heading or subheading should be left-aligned, and subsequent paragraphs should be indented five spaces. A colon is inserted before the equation, but there is no punctuation after the equation. All equations are numbered and are referred to in the text only by the number in parentheses (i.e., (3) reads as “Eq. 3”). Make sure that any different numbering system you use in your work is not confused with reference  or the notation of equation (3). (12)
The Motivations And Expectations Of Students Pursuing Maritime Education
Figure captions appear below the figure, are aligned to the left, and are in lowercase letters. When referring to a figure in a text, the abbreviation “Fig.” is being used. Figures should be numbered in the order in which they appear in the text.
Table headings are displayed centered above the table in upper and lower case letters. When the text refers to a table, the abbreviation is not used and “Table” is capitalized. (12). Figures and tables should be included in the text itself
A conclusion section should be included, which should clearly state the strengths, limitations, and potential applications of the work. Although the conclusion can summarize the main points of the paper, do not repeat the abstract as a conclusion. The conclusion may explain the importance of the work or suggest applications and extensions. (12)
A list of references MUST be included following the information below. Only references in the cited text are included. Each reference in the text is indicated by a number in square brackets (i.e. ). References should be numbered and arranged according to where they are first mentioned in the work, NOT alphabetically.
Advancements In Civil Engineering & Technology
 M Ozaki, Y. Adachi, Y. Iwahori and N. Ishii, Application of fuzzy theory to Chinese character recognition by writers, International Journal of Modeling and Simulation, 18(2), 1998, 112-116. (12)
 R.E. Moore, Interval Analysis (Englewood Cliffs, NJ: Prentice-Hall, 1966). (12) Note that the title of the book is written in lowercase letters and italics. There is no comma after the name. Place of publication and publisher indicated.
 P.O. Bishop, Neurophysiology of binocular vision, J. Houseman (Ed.), Handbook of physiology, 4 (New York: Springer-Verlag, 1970) 342-366. (12) Note that the place of publication, publisher and year of publication are in parentheses. The book editor is listed before the book title.
 D.S. Chan, Theory and Implementation of Multivariate Discrete Systems for Signal Processing, PhD thesis, Massachusetts Institute of Technology, Cambridge, MA, 1978. (12)
Green Processing And Synthesis
 W. J. Book, Design and Control of Flexible Manipulator Arm Modeling: A Tutorial Review, Proc. 29th IEEE Conf. on Decision and Control, San Francisco, CA, 1990, 500-506 (12)
Manuscripts that do not meet the journal’s guidelines will be returned to authors without peer review. Submitted manuscripts that meet the journal’s guidelines are reviewed by the Editor-in-Chief or an editor who will assign them to reviewers. The review process is double blind. The editor prepares a decision letter based on the reviewers’ comments, which is sent to the corresponding author. All non-peer reviewed manuscripts are sent within 10 days and manuscript decision letters within 4 weeks.
Open access authors retain copyright in their documents, and all open access articles are distributed under the Creative Commons Attribution License, CC BY (or Creative Commons Attribution-NonCommercial License CC BY-NC), which allows users (for non-commercial purposes) to copy, use, distribute , transmit and display the work publicly, and create and distribute derivative works in any digital medium for any responsible purpose, with proper attribution.
The use of generic descriptive names, trade names, trademarks, etc. in this publication, even if not specifically mentioned, does not mean that these names are not protected by relevant laws and regulations.
Suranaree Journal Of Science And Technology
Although the advice and information in this magazine is believed to be true and accurate at the date of publication, neither the authors nor the editors nor the publisher accept any legal responsibility for any errors or omissions. The publisher makes no warranties, express or implied, with respect to the material contained herein.
The publication is committed to maintaining high standards through rigorous peer review and a strict ethics policy. Any violations of professional codes of ethics, such as plagiarism, fraudulent use of data, fictitious claims of authorship, should be taken very seriously by editors and will not be tolerated.
It is published in accordance with the Committee on Publication Ethics (COPE) Code of Conduct and the COPE Structure Charts for Cases of Suspected Misconduct.
When an article is accepted for publication, an Article Processing Fee (APC) is charged for publication. These fees cover the cost of turning the manuscript into a finished article, as well as hosting, distributing and promoting the article.
Mohamed Benbouzid Posted On Linkedin
We are committed to making publishing costs as transparent as possible, so each journal’s fees are clearly stated on each journal’s home page.
Once a manuscript is submitted, it is submitted
Journal of marine science and engineering impact factor, journal of tissue engineering impact factor, chemical engineering journal impact factor, marine policy journal impact factor, bioresource technology journal impact factor, journal of engineering impact factor, international journal of engineering & technology impact factor, international journal of engineering research and technology impact factor, journal of engineering technology impact factor, journal of materials science & technology impact factor, journal of electrical engineering & technology impact factor, biomedical engineering journal impact factor